Working process

Suction stage：there is a low pressure area inside the pump body, and the medium to be transported is sucked into the pump body from the source through the effect of negative pressure. This process is mainly caused by the rotation of the impeller of the pump, creating a low pressure area that allows the liquid to be sucked into the pump body.

Closing stage: At the end of the suction stage, the inlet and outlet inside the pump body are closed. The medium is completely transferred with the pump assembly and there is no reverse flow.

Push stage: After the closed stage, with the rotation of the pump assembly, the medium is pushed to the outlet of the pump body. The impeller of the pump drives the medium to rotate, increasing the kinetic energy of the liquid, so that it has enough pressure to smoothly pass through the outlet.

Discharge stage: When the medium is pushed to the outlet of the pump body, a high-pressure area is generated inside the pump body. The high pressure zone enables the medium to flow out of the outlet and then be transported to the target position to complete the entire pump working process.

Application scenario

   Special pump used for water environment such as offshore working platform, for water transmission or fire extinguishing medium.

Commonly used models

CIS Series Horizontal Centrifugal Pump           CL Series Vertical Centrifugal Pump             CLH Series Vertical Centrifugal Pump             

   CSG Series Vertical Centrifugal Pump        CSGB Series Vertical Centrifugal Pump           CLZ Series Vertical Self-Priming Centrifugal Pump

  TSH Series Split Horizontal Single Stage Double Suction Pump               TPY Series Marine Stainless Steel Vertical Multistage Centrifugal

Picture