What Is The Correct Operation Method of The Webbing Sling?
Always read and understand the operating instructions before using the webbing slings. Always store sling in a cool dry, dark, and no ultraviolet place when they are not used. The sling should not be stored near the open flame or other heat sources.
Overview
1. During use, it must be directed by personnel with relevant qualifications. Do not exceed working load limit. If use several pieces together, the load shal be equally distrbuted on several slings as much as possible.
2. When using, hang the webbing slings directly into the center of the lifting hook, don’t hanging it at the tip of the hook.
3. During use, webbing slings should not be crossed, twisted, or knotted. Correct lifting-specific connectors should be used for connection.
.png "correct operation method of the Webbing Sling(1).png")
4. When encountering loads with sharp angles or edges, protective sleeves or corner protectors must be used to protect the lifting straps, to extend the service life of the lifting straps and eliminate safety hazards.
5. When the load is resting on the lifting strap, the lifting strap must not be removed from the load-bearing state.
6. Chemical active environments will affect the strength of the lifting strap. If the lifting strap is used in abnormal environments such as high-temperature occasions or lifting chemicals, it should be used according to the manufacturer's guidance and suggestions. After the lifting strap is soiled or used in an environment with a tendency for acidity or alkalinity, it should be immediately rinsed clean with cold water.
