Thread Foot Valve

Threaded foot valve, material: cast iron, cast steel, stainless steel, bronze, etc.; Nominal diameter: DN25-DN100; Nominal pressure: 0.6Mpa; Connection form: female thread. The difference between threaded bottom valve and flanged bottom valve is the difference in connection method. And the size range of threaded foot valve is smaller, and the pressure is also lower.

Overview

Installation:

Foot valve is to ensure the stable operation of the pump is an important part of its correct installation and maintenance of the pump and water supply system plays an important role in the safe and normal operation. Foot valve is usually bolted or screwed to the outlet pipe. Before installation, check whether the sealing effect of the foot valve is good, such as cracks or aging phenomenon, should be replaced in a timely manner. When fixing the foot valve, pay attention to the appropriate strength, not too tight or too loose, so as not to damage the foot valve and piping. At the same time, the fixing of the foot valve should be carried out after the completion of the outlet pipe to ensure that water is prevented from entering the pipe from the foot valve.

Drawing: