Navigation & Signal Light Controller
The navigation & signal light controller is used for navigator to monitor and control the navigation light conveniently of all kinds of vessels. With the technology of SCM, it is easy to use and maintain and can control multi-navigational signals. And it also has functions like alarm for failure of external connected signal, LED indicator in the panel, dimmer, and automatically recovered fuse at the output end to avoid the replace of the fuse because of the short circuit.
Overview
Standard
Meet the requirements and using conditions of the Steel Ship Classification Rule 2009, approved by CCS.
Features
Embedded installation for the operating panel
PVC sticker and pressing key
Indicators in the panel with dimmer
Easy recognized characters and graphs in the panel
Each key has a corresponding output which can designed as the requirement of customers
Main functions
Control all the external connected navigation lights (on or off), and visual indication is set in the operating panel.
Detect the malfunction of the navigation light and main power
Output contact signal from the controller during the malfunction and connected with “mute” interface.
Flashing control interface can control the flashing of the navigational light
Testing function to adjust the brightness of the indicator in the operation panel
standard serial interface for connecting VDR is available in the controller
During the malfunction,control the status of the navigational light urgently
Technical parameters
Max control routes: 24-routes
Standard routes: 16-routes
Max power for single route: ≤80W
Flash control output:
Flashing frequency: 125±3min
Connecting for 3 seconds and off for 15 seconds
Series interface: data format and sentence complies for NMEA0183
Bund rate: 4800
Protection class: IP20
Material: carbon steel
Installation dimension
