Marine Flanged Stainless Steel SNDR Valve

Marine flanged stainless steel stop check valve combines the functions of stop valve and check valve, which is mainly used to control the flow of fluid and prevent the reverse flow of fluid when necessary. This valve is usually installed in the piping system of a ship to ensure that it can work normally under various working conditions.

Overview

Features:

Structure: It is usually a lifting structure, and the disc can be opened and closed by moving the valve stem up and down.
Configuration: generally plunger type, the disc shape is similar to plunger.
Channel position: straight-through, fluid enters from one end and flows out from the other.
Driving mode: manual operation, usually controlled by handle or wheel.
Material: The main material is stainless steel, which has good corrosion resistance and strength.

Installation:

Select the appropriate installation position: ensure that the valve is installed on the vertical pipe with the bonnet facing up.
Use standard flange connection: make sure the connection is firm and the seal is intact.
Pay attention to the flow direction: ensure that the medium can circulate normally and the valve can work normally.
Tighten flange bolts evenly: avoid air leakage or water leakage.

Drawing: