Double Hole Pipe Clamp With Long Head Bolt

Double hole pipe clamp with Long head bolt is a part that can fix four pipes at the same time, suitable for medium and low pressure (PM ≤ 8MPa) pipes, widely used in various industrial fields, such as chemical industry, petroleum, natural gas, ships, etc., for fixing pipes and wires and cables, and protecting wire harnesses and pipes.

Overview

Advantages

Compact design

Wide range of applications

Easy installation and maintenance

Good corrosion and wear resistance

Low cost and long life

Installation method

First mark the fixed place, then weld or fix the base plate, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, then put the upper and lower half of the pipe clamp body, fix it with screws, prevent it from rotating through the anti-loosening cover plate, then install the second pipe clamp, do not weld the base plate of the already installed aluminum alloy pipe clamp directly.

Double Pipe Clamp-PIC6.jpg

Double Pipe Clamp-PIC1.jpg

Double Pipe Clamp-PIC7.jpg

Pipe O.D D1/D2	Inch I.D.	Inch O.D.	Stacking bolt					Clamp body					Safety locking plate
			G	L1	L2	L3	SW	L1	L2	H	S	B	L	H	S	D
6/6			M6	34	20	12	11	36	20	27	0.8	30	A27 B27	A22 B28	11	1
6.4/6.4
8/8		1/4
9.5/9.5		5/16
10/10	G1/8	3/8
12/12
12.7/12.7		1/2	M8	33	20	12	12	53	29	27	0.8	30	A27 B45	A22 B28	12	1
13.6/13.5
14/14	G1/4
15/15
16/16		5/8
17.2/17.2	G3/8
18/18
19/19		3/4	M8	44	29	12	12	67	36	37	0.8	30	A27 B45	A22 B28	12	1
20/20
21.3/21.3
22/22	G1/2
25/25
26.9/26.9	G3/4		M8	49	34	12	12	80	45	40	0.8	30	A27 B45	A22 B28	12	1
28/28
30/30
32/32	G1		M8	61	46	12	12	106	56	53	0.8	30	A27 B45	A22 B28	12	1
33.7/33.7
35/35		1^1/4
38/38
40/40	G1^1/4	1^1/2
42/42