PRODUCTS
24mm Marine Elec. Windlass With Single Warping Head Single Gypsy

24mm Marine Elec. Windlass With Single Warping Head Single Gypsy

24mm Marine Elec. Windlass With Single Warping Head Single Gypsy is a robust piece of equipment used on ships for handling anchor chains and ropes. It is widely accepted on various working ships. We can be approved by CCS, RS, BV, RINA.

1. Driven by electric motor

2. Manual brake and clutch

3. Simple assembly and maintenance

4. High strength construction, high efficiency gearbox

5. Excellent performance, high security


Overview

Main Technical Specification

Anchor chain diameter(AM2): 24mm                                                    Working load: 24.5kN (full load)/12.25kN (light load)    

Anchor-lifting speed: ≥9m/min                                                             Nominal speed: ≥10m/min (full load)/≥20m/min (light load)

Overload pull of gypsy: 36.7kN                                                             Holding load of gypsy: 149.4kN

E-Motor model: JZ2-H41-4/8/16 (with heater)                                     E-Motor power: 7.5/7.5/5kW

E-Motor speed: 1400/665/300r/min                                                     Voltage: 415V/50HZ/3P

Duty: 10/30/5min                                                                                   Insulation grade: F

Protection grade: IP56

Drawing for 24mm Marine Elec. Windlass With Single Warping Head Single Gypsy

24mm Marine Elec. Windlass With Single Warping Head Single Gypsy Drawing.jpg

Related products for "24mm Marine Elec. Windlass With Single Warping Head Single Gypsy"

Contact Us