DN50 Air Water Separator

DN50 Air Water Separator


The DN50 air water separator is mainly used to separate air and water. The performance and reliability of air water separators are greatly challenged under the complex and variable working conditions of ships, offshore platforms and offshore wind power generation. The main material of our air water separator is stainless steel, strong and durable, and the quality is guaranteed. If you are interested in our products, you can contact us at any time to place an order.

Overview



Structure of air water separator

The structure of the air water separator is designed according to the pressure vessel specification, which is used to remove the liquid droplets in the steam system or compressed air system. The air water separator is a carbon steel or stainless steel equipment with pressure vessel structure, and the interface type is flange structure DIN16/DIN25/DIN40; The air water separator must be installed on the horizontal pipeline, the drainage outlet is vertical down, and the air water separator of all calibers is equipped with mounting brackets to reduce the bearing capacity of the pipeline. To ensure the rapid discharge of the separated liquid, a suitable set of trap combinations should be connected at the bottom drain of the air water separator. This type of valve should generally be installed horizontally in the pipeline.

Drawing

DN50 Air Water Separator PIC.jpg

Images of DN50 Air Water Separator

DN50 Air Water Separators.jpg

Contact Us