RSN7-1600 Stud Welding Machine
Carbon steel, low alloy steel, copper etc. materials with arc weld ability. Welding in the work-piece surface of oxide layer, oil slick, priming paint or electroplate. After welding, no deformation, no convex, downward position welding, vertical position welding, overhead position welding, all position welding.
Overview
Operation:
(1) Locate the welder in a reliable, clear and safe site;
(2) Connect the earth cable, lengthening cable, torch, chuck, pressing plate, ferrule and stud;
(3) Open power suply to observe digital welding voltage, current and time meters;
(4) Adjust welding voltage, time and current, lifting height, extending length, chuck, grip, ferrule and stud
(5) Trial welding to test whether all the parameters are correctly adjusted or not. If not, reset your welding parameters.
(6) Begin to weld studs in your sites
Technical Data:
| Item | RSN7-1600 |
| Core components | IGBT |
| Welding Rage | DN3mm-20mm |
| Welding Current | 200A-160A |
| Welding Time | 0.1S-3.0S |
| Welding Speed | DN20 15pcs/minute |
| Rate Input Power | 50KW |
| Power Switch | 100A |
| Dimension(L、W、H) | 890mm×368mm×560m |
| Weight | 98kg |
