Marine Monitoring Alarm System

This system with micro-processing technology can be used to monitor the working status of E/R equipment, distribution board and other equipment. 34 routes of input ports can be detected and the monitoring status can be extended to the repeater. This system suits to all kinds of vessels.

Overview

Application

It is suitable for detecting all kinds of on-off value of main unit for alarm such as over temperature alarm of water, oil and gas, water and oil level threshold alarm, low insulation alarm of power grid, fire detection alarm, overload alarm, etc.

Function description

Input signal: set up to open or close alarm based on the actual conditions.Whenthe input signal changes,the corresponding LED indicator will flash,the built-in sounder will alarm and immediate contact will close.

Time-delay: when monitoring signals like liquid level,oil level,to avoid a false alarm,time delay can be set up in the monitoring alarm panel.

Test-light/dimmer: Press “test-light” key to test the status of the indicator If the pressing time is more than 2 seconds, dimming works.

Output signal: when alarm happens, “Immediate output” contact will be closed.Without any reply after 2 minutes,“Delay contact” will close. Press”mute”to recover

Repeater Interface: Max 4 repeaters can be connected with a serial port communication technology and shows the monitoring status synchronically. 4-cords cable connects the main part and the repeater.

Technical parameters