IMPA 232481 Marine Scupper Plug
The IMPA 232481 Marine scupper plug is a small diameter scupper plug with a diameter of 45mm, which is made of brass or stainless steel and rubber. In addition to plugging and Marine drainage, it can also effectively avoid sewer backflow and leakage problems. Easy to use, only need to hand twist.
Overview
How to replace the Marine scupper plug
If the Marine scupper plug is damaged, it can be replaced by following these steps:
1. Prepare tools and new plugs: Ensure that you have the right tools, such as wrenches, screwdrivers, etc., and a new plug of the same size as the original plug.
2. Clean the drainage hole: remove the surrounding debris and dirt, so that the hole is clean.
3. Remove the damaged plug: Loosen or remove the damaged plug according to the specific installation method.
4. Check the orifice: Ensure that there is no damage or foreign matter in the orifice.
5. Install the new plug: Install the new plug firmly into the drainage hole according to the correct installation method.
6. Check the seal: make sure that the new plug is installed in place, sealed well, and there is no leakage.
7. Clean up the work site: collect tools and remove debris.
During the replacement process, pay attention to safety to avoid injury. If you are not familiar with the operation, you can refer to the product manual or consult a professional.
Drawing
Images of IMPA 232481 Marine Scupper Plug
CODE | D1 mm | D2 mm | H mm | L mm | Wt. kgs |
23 24 81 | 60 | 45 | 55 | 160 | 2.88 |
23 24 82 | 75 | 52 | 173 | 2.91 | |
23 24 83 | 90 | 65 | 65 | 3.90 | |
23 24 84 | 110 | 85 | 175 | 6.04 | |
23 24 85 | 115 | 90 | 6.52 | ||
23 24 86 | 135 | 110 | 7.55 | ||
23 24 87 | 165 | 135 | 9.63 | ||
23 24 88 | 200 | 165 | 13.13 |