Ceiling Diffuser
The ceiling diffuser is available in aluminum or ABS, and its main components are the panel, wind direction adjusting disc, snap ring, fastening ring, dust collection hopper, and static pressure box. The radial ribs on the panel are used to generate rotating airflow, and the wind direction adjusting disk is used to change the wind direction, which can generate vertical airflow.
Overview
Suggestions:
Circular or square diffuser corresponding to the area of air supply length and width ratio should not be greater than 1:1.5.
Diffuser should be arranged symmetrically or plum blossom-shaped arrangement, the centerline of the diffuser and the distance from the side wall should not be less than 1.0m.
Ground diffuser should not be installed directly under the seat, the installation location from the seat should not be less than 400mm.
Not all ground diffusers need to be equipped with dust collection bucket, and the installation or not of the dust collection bucket does not affect the airflow pattern of the ground diffuser.
Drawing:
Picture:
