A60 Rated Manual Fire Damper

The A60 rated manual fire damper is widely used in ventilation systems on ships and rigs. It can be installed in round ducts. All fire dampers are fitted with a fuse. To prevent fire from spreading in the ventilation duct. When the blades are open, the unit causes no noticeable pressure loss, noise or flow fluctuations. The on/off indicator is visible from the externally set fire dampers.

Overview

Marine fire dampers are one of the important equipments to ensure the fire safety of the ship's cabin, and the correct installation position and precautions can effectively reduce the incidence of fire and protect the lives and properties of the personnel.

Installation Requirements:

1. Adequate inspection and measurement are required before installation to ensure that the size and model of the fire damper are suitable for the installation location, so as to avoid installation failure due to improper installation location or unsuitable size.

2. The installation of fire dampers needs to be operated in accordance with the manufacturer's instructions, and the standards and norms should be strictly observed to ensure safety and reliability.

3. After installation, it needs to be tested and debugged to check whether the fire damper opens and closes normally and whether the controller can be controlled and operated normally.

4. Fire dampers need regular maintenance and repair, keep clean and regularly replace parts to ensure that it can operate normally.

5. In the installation and use of fire-resistant dampers, there is a need to comply strictly with existing safety standards and norms to avoid accidents.

Drawing: